Keurig Won’t Pump Water - Why Won’t The Machine Pump Water?
Have you ever had that moment when you go to make your morning cup of coffee, and the Keurig just doesn’t want to cooperate? You hit the button and nothing happens not even a dribble of water. You try again, and the same result. But this time you press a bit harder, not realizing that you’re about to break the little pump thingy inside your Keurig. And now there’s water all over your countertop, and possibly on the floor too if it decided to shoot out from under the machine at an unfortunate angle. Sigh. If this has happened to you, read on for our tips on how to fix Keurig won’t pump water.
Why is my Keurig not pumping water?
There are a few reasons your Keurig might not be pumping water. The first possibility is that the machine isn’t plugged in properly. This seems like an obvious solution, but it’s worth checking first. Sometimes outlets can become loose, and if your Keurig is plugged into a power strip, that could be the problem as well.
Low water pressure
If your home has low water pressure, it could be the reason your Keurig isn’t pumping water. This is because the pump in your coffee maker needs a certain amount of pressure to function properly. You can test your water pressure by turning on the faucet and seeing how quickly the water comes out. If it’s a slow trickle, that could be your problem.
There are a few ways to solve this issue. One is to use bottled water instead of tap water. Another is to invest in a water filter designed for coffee makers. This will help increase the water pressure and should solve the problem.
Clogged filter
Another possibility is that the water filter in your Keurig is clogged. If it is right, it can restrict water flow and prevent the pump from working properly. This can happen if you don’t change the filter often enough, or if you use tap water that has a lot of minerals in it.
If you think this might be the problem, clean a clogged filter. Remove it from the machine and soak it in soapy water or vinegar for 45 minutes. If the debris isn’t 100% gone after soaking, you can try cleaning it manually with a toothbrush under a strong flow of tap water. When you’re finished cleaning, do another fresh water rinse to ensure that the entire filter is clean. If not, try descaling your Keurig.
Limescale presence
If you live in an area with hard water, there’s a chance that limescale has built up inside the machine and is blocking the flow of water. Limescale is essentially just calcium carbonate, and it can come from a variety of sources, including well water, tap water, groundwater, and even some municipal water supplies.
This sort of water is popular in regions where the water source is natural. It’s common for this kind of water to be high in minerals since it’s often from a well or comes from tap water. When water evaporates, these minerals are left behind and can build up over time. This process is accelerated in coffee makers and other appliances that use water because they heat the water, causing it to evaporate more quickly.
This limescale buildup can eventually block the flow of water completely, preventing your Keurig from brewing a cup of coffee. To clean out the limescale, you’ll need to descale your Keurig. This is a relatively easy process that you can do at home, and there are a few different ways to go about it.
Air in the system
If there is air in the system, it will prevent the water from flowing through and brewing your coffee. To get rid of the air, you’ll need to bleed the Keurig. This is a pretty easy process that anyone can do at home. Just follow these steps:
1. Disconnect the Keurig from the power source.
2. Remove the water tank and the drip tray.
3. Shake out the coffee maker by grasping it with both hands and swinging it back and forth.
4. Quickly raise and lower the tank until you hear a hissing noise, which means the air bubbles are escaping.
5. Fill the water tank with water until it reaches the max line.
6. Start a hot brew cycle.
Clean needle
If your Keurig is leaking water or not pumping water, the problem might be a clogged needle. The needle is what pierces the K-Cup so that water can flow through and brew your coffee. The needles become clogged with dirt and coffee grounds. If it’s clogged, the water can’t get through and will just sit there until you clean it off. Luckily, this is a pretty easy fix. Just follow these steps:
1. Unplug the coffee maker and remove the water tank.
2. Lift up the top of the machine and locate the needle.
3. To separate the top and bottom halves, press the buttons on both sides.
4. Push the lever to the left to release the needle.
5. Slide the straight end of the needle into the fabric, wrap it around a few times, and then withdraw it.
6. Examine the top entrance and exit needles after opening the handle to view the top entrance and exit needles. Clean any debris that may be obstructing the needle using a paperclip or some other sharp instrument. Alternatively, clean the needle with a cotton swab moistened with alcohol.
“More Water Please” Error
If you see the “More Water Please” error message on your Keurig, it means that the water reservoir is not full. This can happen for a variety of reasons, but the most common one is that someone accidentally bumped the machine and dislodged the water reservoir.
1. Check to make sure that the water reservoir is properly attached to the machine. If it’s not, reattach it and try brewing again.
2. If the water reservoir is properly attached, make sure that it’s filled to the max line. If it’s not, add more water and try brewing again.
3. If you’ve checked both of these things and you’re still getting the error message, the problem might be with the water inlet valve. This is a more serious problem that will likely require professional help.
Defective Pump
If you have been properly maintaining your coffee maker and you’re not experiencing an error message, the most obvious reason is that your pump has physical damage.
Like any machine, some of its parts will wear out over time, and it’s natural for it to break completely or partially. If your Keurig mini pump is not working and you’ve had it for a while, it probably has a damaged pump.
This is usually not something you can fix on your own and will require professional help. However, it’s always worth checking to make sure that the pump is getting power. To do this, just follow these steps:
1. Unplug the coffee maker from the outlet.
2. Locate the pump on the back of the machine and remove the cover.
3. Check that the wires are securely connected to the pump and that there is no damage to them.
4. If everything looks fine, plug the coffee maker back in and try brewing a cup of coffee.
Conclusion
Keurig has acknowledged the issue and is working on a fix. In the meantime, you can still use your Keurig to brew coffee by filling the reservoir with water from another source. The problem is “Keurig won’t pump water” are working on a fix and we will update this post as soon as it is available. We hope Keurig resolves this problem soon, as we know many of our readers love their Keurigs. Thanks for reading!
FAQs
Why is my coffee maker not dispensing water?
There are a few possible reasons why your coffee maker is not dispensing water. The most likely reason is that the water reservoir is empty. Another possibility is that the needle is clogged, preventing water from flowing through. Finally, it’s possible that the pump is damaged and needs to be replaced.
How do you prime the pump on a Keurig?
If your Keurig isn’t pumping water, you may need to prime the pump. To do this, remove the water reservoir and then hold down the button that dispenses water for about 30 seconds. Then put the reservoir back in place and try again.
How do I clean my Keurig?
1. Begin by unplugging your Keurig coffee maker from the outlet. You’ll also want to remove any K-cups or coffee grounds from the brewing chamber.
2. Disassemble the water tank, lid, K-cup holder, and drip tray. These removable parts need to be washed with soap and warm water. Using a clean dish sponge or disposable paper towel, wipe down the outside of the machine and all reachable surfaces with mild soap and water.
3. Next, mix together equal parts water and white vinegar in a small bowl.
4. Place an empty coffee filter into the brew basket and pour the vinegar solution over top.
5. Allow the mixture to sit for about 30 minutes. This will help to break down any coffee oil and residue that has built up inside the machine.
6. After 30 minutes, remove the coffee filter and discard it.
7. Rinse out the brew basket with clean water.
8. To clean the needle, use a toothbrush to scrub away any coffee grounds or residue that may be stuck to it. If you can’t reach the needle with a toothbrush, you can also use a cotton swab or Q-tip.
9. Once the needle is clean, rinse the entire Keurig machine with clean water. Be sure to get into all of the nooks and crannies.
10. Wipe down the outside of the machine with a clean cloth.
11. Finally, plug your Keurig coffee maker back in and allow it to run a brew cycle without a K-cup. This will help to remove any remaining vinegar solution from the machine.
12. Once the brew cycle is complete, discard the water and you’re done!
How do I descale my Keurig?
If your Keurig isn’t pumping water, you may need to descale it. This is a process of removing built-up calcium and other minerals from the machine. You’ll need to purchase a descaling solution specifically for Keurig coffee makers. Follow the instructions on the bottle to descale your machine. Once you’re finished, be sure to rinse it out thoroughly with clean water.
Descaling solution not working?
If the descaling solution isn’t working, you may need to soak the parts in vinegar overnight. This will help to break down any tough buildup. Be sure to rinse the parts well with clean water before using them again.
How do you reset the water reservoir on a Keurig?
Check to see whether the water reservoir is clogged. If your Keurig coffee maker won’t pump water, you may need to reset the reservoir. To do so, Remove the water reservoir and then press the button that dispenses water for about 30 seconds. Then replace the reservoir and try again.
How do I unclog my coffee maker?
There are a few things you can do to unclog your coffee maker. The first thing to try is running water through the machine a few times. If that doesn’t work, you can try descaling the machine. You can also use a coffee maker cleaning solution to clean the machine.
Why does my Keurig not work after descaling?
There are a few reasons your Keurig might not work after descaling. One possibility is that you didn’t follow the instructions on the bottle of cleaner. Another possibility is that you need to clean the coffee pot. Finally, it’s possible that the descaling solution didn’t work. If none of these solutions work, you may need to contact Keurig customer service.
How long do Keurigs last?
Keurigs typically last for about four years. However, this can vary depending on how often you use the machine and how well you take care of it. If you use your Keurig every day, it’s possible that it will last for longer than four years. But if you don’t clean it regularly, it may only last for a couple of years.
How often should I descale my Keurig?
You should descale your Keurig every three to six months. However, this can vary depending on how often you use the machine and how hard your water is. If you use your Keurig every day or live in an area with hard water, you may need to descale more often.
What is the best way to store my Keurig?
The best way to store your Keurig is in a cool, dry place. You should also make sure that the machine is unplugged and that all of the parts are dry before you store it. If you’re not going to use your Keurig for a long time, it’s a good idea to clean it before you put it away.
How do I descale my Keurig?
To descale your Keurig, you’ll need to buy a descaling solution. Follow the instructions on the bottle of cleaner. You’ll typically need to run the solution through the machine a few times. Once you’re done, make sure to clean the coffee pot.
What are some tips for using my Keurig?
Here are a few tips for using your Keurig:
- Always use fresh, cold water.
- Make sure the water reservoir is full.
- Don’t overfill the reservoir.
- Don’t use distilled or softened water.
- Don’t put anything other than coffee beans in the coffee pot.
- Clean the machine regularly.
How do you unclog a Keurig with vinegar?
One way to unclog your Keurig is to use vinegar. To do this, fill the water reservoir with a mixture of half water and half vinegar. Run the machine until it’s empty. Then refill the reservoir with fresh water and run the machine again. Repeat this process until the machine is running clearly. Finally, descale the machine